Specification for helmets for equestrian activitiesBS EN 1384: 1997 specifies requirements for protective helmets, that may or may not have a peak, for people involved in equestrian activities. It gives safety requirements that include methods of test and levels of performance for shock absorption, for resistance to penetration and for the strength and effectiveness of the retention system and the deflection of a peak if fitted.

but its principles can also be applied to planning in the marine environment

semi-detached and terraced houses and flats (with not more than four self-contained dwelling units per floor accessible from one staircase) of not more than three storeys above ground

Separation by single or double walls

welding personnel

Standards dealing with these applications shall indicate how an adequate level of safety can be achieved

Minimum yield strengths up to 460 MPa are specified together with low temperature impact properties at temperatures down to –40 °C

including accessories used in connection with these rotary instruments

and looking for ways to measure their progress and effectiveness in successfully implementing KM

This specification covers beam detectors with separations between the opposed components of 1 m to 100 m and minimum separations not exceeding 10 m

Administration of distributed information

BS EN 14873-1 and BS EN 14873-2 covering furniture removal and storage services for private individuals

skin contact with solids and skin and eye contact with liquids