RDL DDS-BN2M Wall Mount 2-In 2-Out Mic/Line to Dante Interface (Silver)The DDS BN2M is a complete wall mounted Dante audio network interface. It features two XLR mic or line inputs on the front panels, plus two line outputs on a rear panel detachable terminal block. Special software is not required to configure the DDS BN2M. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic

the musician or engineer can find the absolute best mic position without regard to the phase relation to the direct signal

both models can connect to PCs via USB2

The extremely lightweight (7 g) but robust metal frame makes long-term usage most convenient

The Steerables SAS-100-WM suspends and aims loudspeakers from walls and other vertical structures

Export stereo master file as stereo wav format

The DA-6400 has two rear audio interface slots

Yamaha AES in/out to a Digi or Tascam pinout machine

Small Venues

The Model 42A's IFB outputs provide power and two channels of unbalanced audio over a single 3-conductor output

Perforated steel lacer strips mount vertically to rackrail brackets and provide many locations for securing cable ties

The FaderPort 8's unique Session Navigator provides easy access to eight mission-critical functions for maximum flexibility

the AVX selects the best operating frequency and switches to a clean channel