Household and similar electrical appliances. Safety - Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electrical motor operated vacuum cleaners, including back pack vacuum cleaners, and dust extractors, for wet suction, dry suction, or wet and dry suction, intended for commercial indoor or outdoor use with or without attachments. It also deals with the safety of centrally sited vacuum cleaners, excluding the installation of the system. NOTE

volumes would need to be adjusted and the protocol steps validated to ensure confidence in the test results

BS EN 60297-3-102 helps you perceive the standard dimensions of an injector/extractor handle for further industrial uses

you can efficiently manufacture high-quality aluminium extruded rod/bar

A modified resin is a resin that has undergone a chemical change

The piezoelectric effect is useful in converting kinetic energy in the form of vibrations or shocks into electrical energy

BS EN 13215 gives you procedures to calculate the performance at various suction temperatures/superheat and at various compressor speeds as well as gives correction factors in order to evaluate the errors and eliminate them immediately

It contains the technical requirements to be fulfilled

New definitions added for interference mode and transient exposure

BS 5070-3 should always be used in conjunction with BS 5070-1 and the relevant symbol standards when preparing mechanical

Manufacturers of glass and glass-made products

2 Coupling/decoupling network for a

BS EN ISO 11806 contains a list of significant hazards it deals with and those it does not deal with