Household and similar electrical appliances. Safety - Particular requirements for whirlpool baths and whirlpool spas1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric whirlpool baths for indoor use and whirlpool spas, for household and similar purposes, their rated voltage being not more than 250 V for single phase appliances and 480 V for other appliances. This standard also applies to appliances for circulating air or water in conventional baths. Appliances not intended for normal household

differ from the loading defined in this test method

possibly at a different scale and with configuration changes to accommodate the new site conditions

trained personnel

1 to 95 Fe2O3 0

BS EN 61300-2-2 evaluates the effects of several successive cycles of engagement and separation of fibre optic connectors or other interconnecting devices on optical performance and mechanical degradation of the component under normal usage conditions

To evaluate the fitness-for-purpose of single-validated methods

such as TLV

A guide for coordination of a CBE associated in the same circuit with SCPD is given

Although many of the principles apply to more general types of calibration function

Usage of process media other than oxygen

This document is applicable for the detection of indications by UT using normal-beam probes and angle-beam probes both in contact technique

NOTE 1 Information on commonly referenced national standards for metallic abrasives and their approximate relationship with ISO 11124 is given in Annex A