RDL DS-RT2 Remote Control Selector Plate (Stainless) - Custom Engraving OptionThe front panel of the D RT2 features two pushbuttons with two associated LEDs. Upon initial power up, the OFF mode is selected. Touching the other button de selects OFF and immediately selects ON. An LED adjacent to each button shows which mode is selected. In a typical installation, the D RT2 may be used to turn an audio or video source on or off. To turn on an audio source, the D RT2 may be connected to an RDL ST SSR1 or ST RX2 Solid State Audio

and has common mode noise rejection up to -100dB at 60Hz

7 Recessed Twist Latches

the SR-16 also provides complete MIDI implementation

Totally Stable - Fully welded construction provides 2500 lb weight capacity and when used in conjunction with the ERK-Z4 brackets the ERK is even seismic certified for up to 650 lbs of essential equipment

Set of 4 blank Decora panels for Lowell Decora rack mount panel assemblies

5 W in standby mode

Input channel processing blocks include Mic Preamp with Phantom Power

Then the music is brought back to it's previous level

the first (BLU-BOB1) is a half rack width

Gator Rackworks Steel Flanged Panel

both outputs may be used at the same time

Software updates can be carried out with ease via the associated USB port